 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
 |
||||||||||||||||||
 |
 |
 |
 |
 |
||||||||||||||||||||||||||||
 |
 |
|||||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||||
 |
 |
|
||||||||||||||||||||||||||||||
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lab Armor Support |
||
|
|
|
|
|||||
|
|
|
 |
 |
|||||||
 |
||||||||
 |
||||||||
|
|
|
|
|
|
|
|
|
 |
||||
 |
 |
 |
||
 |
Contact Us |
 |
||
 |
||||
 |
||||
|
|
|
|
|
Shop the Lab Armor Online Store |
|
|
|
 |
||||
 |
||||
|
|
|
|
|
Must Protect the Lab™ Call (800)-210-8612 © 2009 Lab Armor. All rights reserved. "Lab Armor"and "Bead Bath" are trademarks of Lab Armor. Bath Armor is subject to pending patents. San Antonio, TX |
|
|
|
Disclaimer | Site map | Media info | Privacy policy | Returns | Contact us |
|
|
|
What to do about metal cover plates at the base of older baths.
Modified: July 10, 2008
Article: BT1426
Symptoms
Some customers may experiences issues when trying to use Bath Armor in their old water baths. To troubleshoot these issues, follow the recommendations below.
Products Affected: Bath Armor
- Problem
Metal cover plate in the bottom of older style water baths
Resolution
Fill the spaces below and above the cover plate at with Bath Armor
- Identify the cover plate. If you see a metal plate similar to what's pictured here, follow these steps outlined below.
- Switch bath to OFF position, unplug, and empty water
- Remove metal base plate to uncover thermostat or heating element
- Clean bath thoroughly with soap and water; rinse tub with 70% ethanol and allow to completely dry
- Clean metal base plate thoroughly with soap and water; rinse with 70% ethanol and allow to completely dry
- Once completely dry, first fill space beneath metal base plate with Bath Armor™ then replace the plate
- Fill bath to 3/4 volume with Bath Armor™
- For more information on troubleshooting these issues, email our technical services using the link below.
